Descripción
Reflejos
1. Operación liviana y flexible, con un peso de solo 1,25 kg, no se cansará fácilmente durante la operación.
2. Con mango de goma fácil de moldear y delantero de metal duro y ultra duradero importado, duradero
3. Fácil de abrir, puede abrir automáticamente todas las ranuras para clavos de aluminio, se puede ajustar la profundidad de los clavos, operación simple
4. Excelente mano de obra y estándar, la pistola de clavos neumática es adecuada para tubos de aire de 6 a 8 mm.
5. Adecuado para el montaje de la industria de la decoración, la fabricación de tableros de tres capas, tableros de madera y la fabricación de muebles de ratán, etc.
Detalles
Especificación:
Tipo de artículo: Pistola de clavos neumática
Modelo de especificación: F50
Diámetro del alambre de clavo: Aprox. 1,26 x 1,05 mm/0,05 x 0,04 pulgadas
Longitud útil de las uñas: Aprox. 25 ~ 50 mm / 1 ~ 2 pulgadas
Presión de trabajo: 0,4-0,8 MPa
Tubo de aire aplicable: Aprox. 6 ~ 8 mm / 0,2 ~ 0,3 pulgadas
Tamaño del producto: Aprox. 24 x 22 cm / 9,4 x 8,7 pulgadas
Cómo utilizar:
1 Esta pistola de clavos se utiliza especialmente para trabajos en madera como tableros de alambre, rodapiés, etc.
2 Antes de usar la pistola de clavos neumática, gotee un poco de aceite lubricante de la unión de la tubería. La unión de la tubería se conecta con aire comprimido. Instale clavos para pistola en la ranura para clavos, ciérrelo y tire del mango para usarlo.
Lista de paquetes:
1 pistola de clavos.
1 lubricante.
2 llaves hexagonales.
1 manual de usuario.
Nota:
1. Lea el manual del usuario antes de usarlo.
2. Solo se puede utilizar aire comprimido y la presión de trabajo no supera los 0,8 MPa.
3. Está estrictamente prohibido utilizar oxígeno y otros gases inflamables y explosivos, y está estrictamente prohibido utilizar compresores de aire de alta presión como fuente de energía.
4. Antes de usar, asegúrese de confirmar que el manómetro del compresor de aire sea correcto y confiable, para evitar el uso de sobrepresión y causar lesiones.
5. Cuando utilice la pistola de clavos, use gafas protectoras y guantes protectores para garantizar la seguridad del operador.
6. Al instalar clavos, retire el conector de aire y corte la fuente de aire.
7. Está estrictamente prohibido apuntar con la punta del arma a usted mismo o a otros, para no causar daño.