Highlights Working Capacity can reach up to 5.0T(11023lb)as a jack. With 12V vehicle power outlet, low pressure rod, set for the sports car. Equipped with double motor driver inside, it works independently and effectively. Lifting height range is from 135 mm to 360 mm. Lift the car in less than a minute by the jack, change a tire quickly. Non-slip cross groove design. Freely adjustable height. The panel is easy to understand and operate. First adjust the mode to the lift mode, then press the button (up), you can easily ascend it. And the pressure gauge makes it convenient for you to check the inflation pressure while using the inflatable model. It is able to function as a car jack, an air pump and a LED flashlight.So it can meet multiple demands. Matching with the relevant complete small tools,safety hammer, gloves, BMC packing, engineering ABS shell. Including car electric jack; safety hammer; plastic case; 3.5m power cable; Battery Clamp with Wire; Fuse ; Inflate Head ; Hex Key;Inflate Needle; Pair of Gloves; User Manual. Very portable and easy to use. Details Electric Car Jack 3 Ton 12V Floor Jack, All-in-One Electric Scissor Jack 120-370/170-420MM Lifting Range Scissor Lift Jack   Specifications Max. Loading Car Weight: 3T / 6600 lbs Lifting Range(SUV): 6.7-16.5 inch / 17-42 cm Lifting Range(Sedan): 4.7-14.6 inch / 12-37 cm Rated power: 100W Operating Voltage: DC 12V Max.current: 13A Fuse: 15A   Inflator Power Cable: 137.8 inch / 3.5 M Max Pressure: 150 PSI Air Flow: 35 L/Min Pump Current: 10A   Wrench Operating Voltage: DC 12V Wrench Max.current: 13A Wrench Rated Power: 80W Maximum Torque: 480 N.M   Package Content 1 x Electric Car Jack 1 x Electric inflator pump 1 x Electric Impact Wrench 1 x Battery Clip 1 x Cigarette Lighter Power Line 3 x Fuse 1 x Hand Crank 1 x Pair of Gloves 1 x Lifting Heads for SUV and for sedan   Feature Our electric scissor jack can reach up to a maximum lifting weight of 3 tons (6600 pounds) and a lifting height range of 6.7-16.5 inch(SUV) / 4.7-14.6 inch(Sedan). And will automatically stop working after reaching the height limit.   Easy to operate just by two switches on the remote control. The electric jack can lift the car to its maximum height as short as minutes, more labor-saving than manual jacks. The two-way power supply (battery clip with 12V DC power socket or car cigarette lighter) allows getting power from the car battery.   An electric impact wrench is included to remove the screws and quickly replace the tires. The built-in tire pump will inflate the tire quickly and get your work done. You can easily and quickly repair tires in an emergency, avoiding spending time waiting for a repair shop.   The red triangle warning sign outside the car lift jack box can be used as a warning road sign when repairing on the highway. The entire box parts are precisely inlaid, and the toolbox tools will not be misplaced. The toolbox ensures neat storage, easy to carry, and can be placed in the car or garage for your convenience.    The 3 ton car jack features a heavy-duty steel structure, large base, and saddle, making the car jack firm and stable. The powerful motor drives to ensure good transmission performance. The jack head uses a non-slip design: a cross-shaped groove plus particles protruding from the surface to increase friction.         Automatic Car Electric Jack 12V DC 5T(11023lb) with Tire Inflator Pump and LED Flashlight   Specification Max Capacity: 5.0T (11023 lb) Lifting Height: 5.3 inch-14.2 inch (135 mm-360 mm) Max. Current: 13A Rated Power: 150W Voltage: DC 12V Air Pump Specifications Air Flow: 35L/min Max. Pressure: 150PSI Rated Power: 120W Max. Current: 10A Voltage: DC 12V   Package Content 1 x Car Electric Jack 1 x Safety Hammer 1 x Plastic Case 1 x 3.5m Power Cable 1 x Battery Clamp with Wire 2 x Fuse 2 x Inflate Head 1 x Hex Key 1 x Inflate Needle 1 x Pair of Gloves 1 x User Manual   Feature Working Capacity can reach up to 5.0T(11023lb)as a jack. With 12V vehicle power outlet, low pressure rod, set for the sports car. Equipped with double motor driver inside, it works independently and effectively.   Lifting height range is from 135 mm to 360 mm. Lift the car in less than a minute by the jack, change a tire quickly. Non-slip cross groove design. Freely adjustable height.   The panel is easy to understand and operate. First adjust the mode to the lift mode, then press the button (up), you can easily ascend it. And the pressure gauge makes it convenient for you to check the inflation pressure while using the inflatable model.   It is able to function as a car jack, an air pump and a LED flashlight.So it can meet multiple demands. Matching with the relevant complete small tools,safety hammer, gloves, BMC packing, engineering ABS shell.   Including car electric jack; safety hammer; plastic case; 3.5m power cable; Battery Clamp with Wire; Fuse ; Inflate Head ; Hex Key;Inflate Needle; Pair of Gloves; User Manual. Very portable and easy to use.         Automatic Car Electric Jack 12V DC 5T(11023lb) With Electric Impact Wrench Inflator Pump and Flashlight   Specifications Max Capacity: 5.0T (11023lb) Lifting Height: 6.1 inch-17.71 inch (155mm-450mm) Max. Current: 13A Rated Power: 150W Voltage: DC 12V   Air Pump Specifications Air Flow: 35L/min Max. Pressure: 150PSI Rated Power: 120W Max. Current: 10A Voltage: DC 12V   Electric Impact Wrench Max.Torque: 340N.M Input Voltage: 12V DC Maximum Current: 12A Weight: 2 KGs   Package Content 1 x Car Electric Jack 1 x Electric Impact Wrench 1 x Safety Hammer 1 x Plastic Case 1 x 3.5m Power Cable 1 x Battery Clamp with Wire 2 x Fuse 2 x Inflate Head 1 x Hex Key 1 x Inflate Needle 1 x Pair of Gloves 1 x User Manual   Feature Working Capacity can reach up to 5.0T(11023lb)as a jack. With 12V vehicle power outlet, low pressure rod, set for the sports car. Equipped with double motor driver inside, it works independently and effectively.    Lifting height range is from 155mm to 450mm. Lift the car in less than a minute by the jack, change a tire quickly. Non-slip cross groove design. Freely adjustable height.   The panel is The panel is easy to understand and operate. First adjust the mode to the lift mode, then press the button (up), you can easily ascend it. And the pressure gauge makes it convenient for you to check the inflation pressure while using the inflatable model.    It is able to function as a car jack, an air pump and a LED flashlight.So it can meet multiple demands. With the electric impact wrench, 340N.M max torque, you can replace the wheel easily.   Including car electric jack; safety hammer; plastic case; 3.5m power cable; Battery Clamp with Wire; Fuse ; Inflate Head ; Hex Key;Inflate Needle; Pair of Gloves; User Manual. Very portable and easy to use.       Illustrate Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. Please refer to the actual product. The measurement allowed error is +/- 1-3cm.   *Product Notes:   1. For any product problems, you must provide communication vouchers, pictures, videos, etc. with the seller. 2. If the product is returned to the overseas warehouse due to the wrong address, no refund will be given. 3. No reason to return any non-product problems, such as the following wrong order, wrong purchase by customer, customer dislike, etc. 4. Please contact the online customer service before returning the product for a refund, otherwise the return will not be refunded. 5. Items must be unworn, undamaged and in original packaging.   Note: Dropshipping to 48 states in the United States. Some remote states in the United States (short code: PR, HI, VI, AE, AP, AK, GU, AS, MP) do not provide a drop shipping service for the time being.      

Read more less

Specification EAN:8718475813743 Number of Packages:2 parcel Details The board lifter is an indispensable tool for attaching various plate material. This tool make it easier and safer to assemble sheets on high walls or ceilings. The lifter also has wheels, so it can be easily moved.   The drywall hoist is suitable for plates up to 192.1" x 48" and weighing up to 149.9 lb. The working height can be set variably between 55.1" and 137.8". After use, the plate lifter can be easily and quickly folded. This makes it even easier to move. Color: Red and black Material: Steel Adjustable working height: 55.1" - 137.8" Product height: 48" - 131.9" Suitable for sheets up to 192.1" x 48" Foldable Weight of board lifter: 97 lb Maximum lift capacity: 149.9 lb Number of castors: 3 With brakes

Read more less

Highlights 1. Lightweight and flexible operation, weighing only 1.25kg, will not be easily fatigued in operation 2. With easy to shape rubber handle and imported hard and ultra durable metal striker, durable 3. Easy to open, can automatically open all aluminum nail grooves, nail depth can be adjusted, simple operation 4. Great and standard workmanship, the pneumatic nail gun is suitable for 6-8mm air tube 5. Suitable for the assembly of decoration industry, the manufacture of three layer boards, wooden boards and the manufacture of rattan furniture, etc Details Specification: Item Type: Pneumatic Nail GunSpecification Model: F50Nail Wire Diameter: Approx. 1.26 x 1.05mm / 0.05 x 0.04inUsable Nail Length: Approx. 25 ~ 50mm / 1 ~ 2inWorking Pressure: 0.4-0.8MPaApplicable Air Tube: Approx. 6 ~ 8mm / 0.2 ~ 0.3in Product Size: Approx. 24 x 22cm / 9.4 x 8.7inHow to Use: 1 This nail gun is specially used for woodwork such as wire boards, skirting boards, etc.2 Before using the pneumatic nail gun, drip a little lubricating oil from the pipe joint. The pipe joint is connected with compressed air. Install gun nails in the nail slot, close it, and pull the handle to use.   Package List: 1 x Nail Gun 1 x Lubricant 2 x Hex Wrench 1 x User Manual    Note: 1. Read the user manual before use 2. Only compressed air can be used, and the working pressure does not exceed 0.8MPa 3. It is strictly forbidden to use oxygen and other flammable and explosive gases, and it is strictly forbidden to use highpressure air compressors as power sources 4. Before use, be sure to confirm that the pressure gauge of the air compressor is correct and reliable, so as to avoid overpressure use and cause injury| 5. When using the nail gun, please wear goggles and protective gloves to ensure the safety of the operator. 6. When installing nails, remove the air connector and cut off the air source 7. It is strictly forbidden to point the tip of the gun to yourself or others, so as not to cause harm

Read more less

Highlights The pneumatic jack capacity: 6600--11000 lbs. Minimum height: 6.3"/ 160 mm. Maximum height: 15.75"/400 mm. It only takes 5 seconds to lift. Our pneumatic jack is a high-strength steel that makes the whole body sturdy and durable. Highly sealed airbags will not leak or be scratched. In addition, our wheels are better suitable for all-terrain, helping you maintain your car anytime, anywhere. keep the red valve closed, open the green valve, and input the compressed air; when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The safety valve in the middle ensures the injected gas is not excessive to ensure the security of the use process. This airbag jack has a long handle, which makes the jack easy to move and use. And this handle can be disassembled from the middle, saving space and making it suitable for you to keep in your trunk. The quick jack car lift is suitable for the situation where a single wheel needs to be lifted in soft terrain or muddy roads for family-used cars, minivans, SUVs, and off-road vehicles. Details Specification Model: 3T-5T Pneumatic Jack Capacity:3-5 Ton/6600-11000 lbs Min. Height: 160 mm/6.3'' Max. Height: 400 mm/15.75'' Air Inlet: G1/4 Lifting Time: 5 Sec Working Temp: -60℃~ 50℃ Color: Red,Blue,Black,White Package Content: 1 x Pneumatic Jack   Feature Labor-Saving Jack: The pneumatic jack capacity: 11000 lbs/5T. Minimum height: 6.3"/ 160 mm. Maximum height: 15.75"/400 mm. It only takes 5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted.   Heavy Duty Construction: Our pneumatic jack is a high-strength steel that makes the whole body sturdy and durable. Highly sealed airbags will not leak or be scratched. In addition, our wheels are better suitable for all-terrain, helping you maintain your car anytime, anywhere.   Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air; when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The safety valve in the middle ensures the injected gas is not excessive to ensure the security of the use process.   Operable Handle: This airbag jack has a long handle, which makes the jack easy to move and use. And this handle can be disassembled from the middle, saving space and making it suitable for you to keep in your trunk.   Wide Application: The quick jack car lift is suitable for the situation where a single wheel needs to be lifted in soft terrain or muddy roads for family-used cars, minivans, SUVs, and off-road vehicles.       Illustrate Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. Please refer to the actual product. The measurement allowed error is +/- 1-3cm.   *Product Notes:   1. For any product problems, you must provide communication vouchers, pictures, videos, etc. with the seller. 2. If the product is returned to the overseas warehouse due to the wrong address, no refund will be given. 3. No reason to return any non-product problems, such as the following wrong order, wrong purchase by customer, customer dislike, etc. 4. Please contact the online customer service before returning the product for a refund, otherwise the return will not be refunded. 5. Items must be unworn, undamaged and in original packaging.   Note: Dropshipping to 48 states in the United States. Some remote states in the United States (short code: PR, HI, VI, AE, AP, AK, GU, AS, MP) do not provide a drop shipping service for the time being.      

Read more less

Highlights Rotary Hammer 1100W(Red + Black) 1-1/2" SDS Plus Rotary Hammer Drill 3 Functions Details   1100w power motor for demolition/concrete 3 Functions: Drilling; Hammer; Drilling/Hammer; Metal gear housing for jobsite; Extra Drill Chuck 1/2 inch w/SDS plus shank make you use SDS plus drills and general purpose drills; Specifications: Voltage: 110 V/60 HZ; Input Power: 1-1/2 HP(1100 W); No Load Speed: 850 RPM; Impact Rate: 3900 BPM; Max. Drill Capacity Dia.: 1-1/2 inch (32MM); Package Included: 1 pc: 3-Function Rotary Hammer; 1 pc: Side Handle; 1 pc: 14x250mm Point Chisel; 1 pc: 14x250mm Flat Chisel; 3 pcs: 6in-long Drills: 8mm/10mm/12mm; 1 pc: 1/2 inch (13mm) Drill Chuck w/SDS plus shank; 1 pc: Plastic Carry Case; 1 pc: User's Manual.

Read more less

Details Measurement: 13.15" x 10.94" x 10.94"Brand new and high quality Simple Efficient Single Stage Design --High Efficiency and Low Noise --Heavy-duty Aluminum Alloy Casing --Direct Drive Motor Allowing Easy Starting and is Maintenance Free --Oil Sight Glass For Monitoring Oil Levels --With Oil Drain Plug Positioned at Bottom of Oil Reservoir --Internal High Volume Cooling Fan For Extended Use --Exhaust Port with Exhaust Cap --ON/OFF Switch --Non Slip Cushion Handle --Comes with a Bottle of Vacuum Oil as FREE GIFT --lightweight and Easy to carry

Read more less

Highlights Track Rod Setting Kit Specification EAN:8718475855767 Number_of_packages:1 parcel Details Made in highest quality, this track rod setting kit is designed for long life use and categorized into industrial grade.With this set at hand, you are able to change the tie rod ends without additional alignment. It can also be used for replacement of defective tie rod head and adjusting new joint precisely. Included with various clamping, fixing devices and calipers, the track rod setting tools is universally applicable, thus greatly reducing the workload when changing tie rods.9 pcs supplied in a blow molded caseSpecificationsMain unit with clamping device0.39" & 0.47" caliper, short and long type0.67" caliper for VW carsFixing unitCaliper for depth measuringSimple to change the tie rod ends without additional alignmentAllows precise adjustment of new jointFor replacement of defective tie rod headUniversally applicableHighest quality design for long life in industrial use

Read more less