Description
Details
Product specifications:
Material: aluminum alloy
LED type: CREE XPE
Switch position: tail (ON / OFF, mode selection)
Waterproof rating: waterproof in daily life
Power: 1*18650 battery (not included)
Product size: 12.4*4.1*2.3 cm
Tool size: 9 cm
Features:
Exquisite look with 3 mode lighting effects: high, low and strobe.
The maximum output brightness is up to 600 lumens.
Multi-function flashlight 6 built-in tools.
The body is made of aluminum alloy that is sturdy and durable enough for everyday use.
Non-slip, abrasion resistant and waterproof design.
Special reflector design improves light output efficiency.
Suitable for home maintenance, outdoor activities, such as hunting, cycling, hiking, camping, etc.
nstructions for use
1. Check the battery: Make sure the battery is charged and installed in the correct direction.
2. When the flashlight is in use, it should be selected according to the voltage and battery requirements of the flashlight. It should not be used indiscriminately to prevent the circuit board from being burnt out. Do not use the batteries of different models and voltages at the same time.
3. In use, when the brightness of the flashlight changes significantly, turn off the flashlight to prevent the battery from being over-discharged and recharge in time; pay attention to the waterproof and moisture-proof battery.
Anti-drop, etc., according to the charging speed of the charger when charging, after the indicator light changes, take out in time, do not overshoot.
4. For batteries that are not used for a long time, the battery should be fully charged and maintained, and then charged and discharged normally for about three months to avoid chemical corrosion.
5. Keep the inner wall of the lamp cup clean. Never wipe it with your hands or a hard object. Clear the fingerprint on the lens and wipe it gently with a cotton swab and lens cleaner.
6. Do not touch the flashlight with sunlight, water, chemicals and corrosive gases for a long time to avoid damage to the flashlight.
7. Non-professionals should not disassemble the flashlight to prevent damage to the circuit board.
Precautions
1. Do not expose the light directly to the eyes to avoid injury to the eyes.
2. Do not use overvoltage, the voltage should not exceed 4.2V, please do not reverse the battery, otherwise it will burn the circuit board.
3. Please look for the positive and negative poles of the charger when charging, do not overcharge and discharge the battery, so as not to damage the battery life (the charging time is generally 5-8 hours).
4. When using the flashlight, check that there is no looseness at each thread, otherwise it may cause the light to be bright.
5. The flashlight should be kept away from sunlight or high temperature. After using it, please take out the battery and store it in a cool and dry place.
6. The company's flashlight has the ability to waterproof the life. Generally, the rain will not cause problems, but it does not have the diving function. Do not carry this flashlight to dive or put it in the basin or bathtub for a long time.
7. To keep the O-ring (sealing rubber ring) and the thread from rotating smoothly, wipe the Vaseline oil on the surface 2-3 times a year.
Charging instructions
1. When the power is insufficient, it should be replenished in time to avoid affecting battery life.
2. The battery should also be charged during long-term storage.
black: no battery and charger
Suit: a set of batteries and chargers
Weight(g): black:190; Suit:400.
Package Weight(g): black:220; Suit:450.
Package Size(mm): **.
